Kanti Enterprises has been certified ISO 9001:2008

Quality is our top priority. All products are manufactured in accordance with industry-accepted standards. Our employees are totally committed to our policy of providing quality products and services which meet or exceed our customer requirements and in accordance with ISO 9001:2008.


Kanti Enterprises will provide products and services that will satisfy our customers’ requirements for quality and delivery. We are committed through the efforts of our employees to continuously improve our products, processes, and company.
In order to meet these goals, we will pursue the following objectives :

  • Provide quality products and services that meet our customers’ requirements.
  • Provide our products and services on time.
  • Provide our products and services at a competitive price for the best value.
  • Provide a system of Continuous Quality Improvement of all products and services to maintain Kanti Enterprises as a Quality Leader.
  • Promote a system of employee involvement, motivation, and training whereby each provides their best input to both internal and external customers.


logo_ansilogo_astm logo_apilogo_asmelogo_awwalogo_din

            ANSI                              ASTM                                 API                          ASME                            AWWA              DNN/JIS/BS


Being an ISO certified company; we are committed to provide quality products at economical price with scheduled consistency to our clients. Our adherence to principles of Total Quality Management (TQM) has helped us in receiving ISO 9001: 2008 certification. With years of industry experience, we have developed quality objectives and work plan for quality management. By reviewing and monitoring all the stages of production processes, we have been to bring a constant development in our product range.

All our products are tested in accordance with internationally accepted standards using various test procedures. Moreover, we provide specific testing as per client’s demand. We have appointed a team of quality controllers to maintain highest level of quality in our product range.


We are engaged in providing our clients material with inspection of any third party. The third party inspection provides quality assurance for buyers. In this process, we take care of material certification, design review and certification of equipment. The quality assurance services includes vendor audits and engineering inspection of mechanical and electrical equipment. The Inspection Agency can be nominated by client or we can arrange the third party inspection by various world class reputed agency such as:

     chemtex     dnv     sgs     bvqi     tuv-nord     tuv-sud   lloyds

     germanischer     ibrpdil     rites     intertek     underwriters     jacobs


In order to make sure that all our products meet the definite quality standards as per industry quality standards and defined ASTM standards, we conduct certain quality tests on them. Some of our tests include :

Chemical Testing

Chemical analysis is carried out as per the ASTM standards in NABL approved laboratory.

Mechanical Testing

Various Parameter is tested such as Tensile, Hardness, Flaring, Flanging, Flattening, Reverse bend, according to the ASTM Standard are regularly carried out.

Hydro Test

100% hydro testing on a hydraulic test bench is carried out using a high-pressure pump on all pipes & tubes, as per the ASTM A 450 & 530. Air Under Water Test / Pneumatic Test Air Under Water Test Even though this is a supplementary requirement, the company has made a point to test all the tubes coming out of a factory to be tested under compressed air to determine any leakage ensuring ultimately that there are no incomplete weld penetrations.

Eddy-Current Testing
It is conducted to detect any sub surface defect etc. This test is carried out by using Techno four flaw marking detective system on the entire length of the tubes as per the E426 with hole or notch standard.

Micro Structure Examination / Analyzer Software

We have the facility to measure ferrite content; Microscope helps to check the grain structure of pipes and tubes after annealing process. The above microscope is attached with analyzer software, which automatically indicates grain structure without manual intervention. Microstructure examination is carried out as per ASTM E-112

Hardness Tester

Hardness tester is used to check the surface hardness of material with the help of Rockwell Brinell scale on 30T scale. Above test is carried out as per ASTM A-370

Corrosion Testing

To find out the susceptibility of the material to intergranular corrosion attack or to measure rate of corrosion, IGC test as per A-262 practice A B C or E in our fully equipped in house laboratory.

Chemical Laboratory

Also we have in-house fully equipped laboratory to check, chloride content in water, Daily pickling, passivation, coating & soaping bath analysis.

Radiography Testing

We can also provide radiography testing facilities with an X- Ray unit.

Ultrasonic Testing

We can arrange an off-line ultrasonic testing facility having four-probe water emulsion system with a microprocessor unit to detect special process flow. In addition to above, the system can mark detects by just spraying.


Our modern warehousing unit has sufficient capacity to store the bulk ferrous & non-ferrous metal Pipe, Tube, Flange, Fitting, Sheet, Plate, Rod.We have experienced inventory managers, who keep complete record of incoming and outgoing products. All the products are stored in a segregated manner to avoid any confusion during dispatch.

Prior to the dispatch, all the products are carefully packed to ensure safe delivery. The packages are properly labeled with complete information about the products. Moreover, our logistics department is always updated the special packaging requirements for export consignments.